Featured
Pressure Treated Lumber Species
Pressure Treated Lumber Species. Can be used in applications that are easily maintained or replaced. Some retailers sell only ground contact lumber if the lumber is pressure treated.

If your specific site is normally either very wet or very dry, the emc will be higher or lower. Color of the treated wood varies from light brown to dark green, depending on the type of oil and treating process. The quality of the wood supplied must be equal to or greater than that shown on the drawings and specifications or the stability of these structures will be impaired.
Color Of The Treated Wood Varies From Light Brown To Dark Green, Depending On The Type Of Oil And Treating Process.
In most areas of the united states. The odor of the oil may be noticeable near the treated wood. 2x8s, 2x10s and 2x12s for joists, stair stringers and beams.
Pt Lands In Two Basic Camps:
Uc3b or uc4a are perfect for ground contact applications. The treated lumber is typically southern yellow pine in the eastern and. Answers to these questions and more:
Pressure Treated Lumber Used For Ground Contact Usually Has Twice The Chemical Retention Level Above Ground Rated Wood.
You can usually find the species of wood by looking on the tag stapled to one of the ends. The quality of the wood supplied must be equal to or greater than that shown on the drawings and specifications or the stability of these structures will be impaired. Species or whether the wood has been pressure treated (top photo).
As A Result, Wood Species Such As Southern Pine, Which Have A High Percentage Of Sapwood, Are Predominately Used In Pressure Treating.
Ground contact and above ground. Sometimes, if the lumber has been pressure treated for outdoor use, you’ll see the letters “pt” or “gc” either on the stamp or on the shelf. At decks & docks, all of our wood is southern yellow pine, a sustainable, dense variety known for its longevity.
The Anatomy Of Southern Yellow Pine Sapwood Permits Exceptional Depth And Uniformity Of Treatment.
Lumber grades indicate number of knots and imperfections in the wood and the straightness of the grain. We expect lumber in aboveground, protected. If your specific site is normally either very wet or very dry, the emc will be higher or lower.
Comments
Post a Comment